Duschablage Ohne Bohren 2 Stück - Duschregal Ecke mit Haken, Duschablage Edelstahl für Badezimmer und Küche (Schwarz)

We focus on bathroom shower trays to provide customers with a good bathroom experience and organize the space for bath essentials.

We understand that the bathroom is a place to relax, and a good bathroom organizer can keep you in a good mood all day long while keeping your bathroom tidy and space-saving

shape.

Shower shelf is a great choice for your home and organizes your bathroom essentials!

Shower shelf installation
How to install:

1. Clean the area where you want to mount the shelves with alcohol and let it dry completely.

2. Take a spirit level, a dry-erase marker, a credit card or a plastic scraper and one of the adhesive pads.

3. Place each end of the level on the walls where you want the shelves to be at the desired height, making sure it is level. Take your dry erase marker and make a small mark on each wall about 2.5 cm from the corner.

4. Take the adhesive strip, leave the back ON and align it with the mark you just made. Now place your level under the bottom edge of the adhesive strip and make sure it's level. Make another mark about 4-5 inches from your first mark. Do this twice... once on each wall.

You should now have four perfectly aligned markers... two on each wall.

5. Remove the adhesive from the strip by holding the front clips in place.

6. Tilt the adhesive strip 45 degrees towards the wall so that it does not stick while aligning the adhesive strip with the marks you have made... do not cover them with the adhesive strip, just use the markings for alignment. Make sure that the openings in the clips are facing UP.

7. Once you have the strip with the markings level, but don't cover it, tilt it to stick to the wall.

8. Use the credit card or plastic scraper to squeeze out all the air bubbles.

9. Repeat on the other wall and again for the second shelf.

10. Your strips should now be perfectly aligned and level, and in the position where you need to carefully insert the shelves. Wait 24H for the adhesive strips to fully cure before loading the shelves.

How to remove:

If you need to tear off the attached glue, you can heat the adhesive surface with a hair dryer and then tear it off. Please note that the adhesive is not reusable.